F302 - 3U CompactPCI® Managed 8+1-Port Eth. Switch

Technical Data

Switch Fabric Key Features

Eight 10/100Base-T ports at front panel
• Electrical isolation: 1500Vrms

Ninth 10/100Base-T port via CompactPCI® J1 (rear)

Auto-negotiation

High-speed non-blocking, store-and-forward switching

8K MAC address lookup table with automatic learning and aging

QoS (Quality of Service) support with 4 traffic classes (IEEE 802.1p tagged frames)

Layer 2 switching

Back pressure or IEEE802.3x flow control

Automatic MDI/MDI-X crossover (all ports)

TCP/IP (IPv4, IPv6)

Management Firmware System Features

Saving and restoring user configurations

Software upgrades through TFTP

System logs (syslog) and e-mail alerts for critical events

Remote monitoring (RMON) and alarm generation

Displaying the running configuration in the form of CLI commands

DHCP client, server and relay

Management interfaces through
• CLI (RS232 console, Telnet, SSH)
• SNMP v3
• WebUI (HTTP and HTTPS/SSL)

Switch configuration can be loaded from external dongle

Management Firmware Layer 2 Features

Transparent bridging

QoS (DiffServ) and 802.1p traffic prioritization queuing, polishing, shaping

VLAN-aware bridging with GARP

Static and dynamic VLANs (through GVRP)

Dynamic learning of multicast groups through GMRP

Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure loop free topology formation

Reducing multicast traffic in the network through multicast snooping - IGS (IPv4) and MLDS (IPv6)

IGMP proxy

Aggregating physical ports for increasing bandwidth and redundancy through link aggregation (LACP)

Link Layer Discovery Protocol (LLDP)

SNMP (v1, v2c, v3) agent and MIB support, configuration save/restore

Management Firmware Security Features

User authentication using 802.1x

Controlling management access through SNMP, CLI and web only from authorized managers

MAC based and IP based access list (ACL) for traffic filtering

Rate-limiting and storm control to prevent packet flooding from malicious peers

Supported Ethernet Standards

Transparent bridging: IEEE 802.1d, 2004

VLAN: IEEE 802.1q Rev D5.0, 2005

Port based VLANs: IEEE 802.1q Rev D5.0, 2005

GVRP/GMRP support: IEEE 802.1d

Rapid Spanning Tree Protocol: IEEE 802.1d

Multiple Spanning Tree: IEEE 802.1s, IEEE 802.1q Rev D5.0, 2005

IGMP snooping: draft-ietf-magma-snoop-12.txt

MLD snooping: draft-ietf-magma-snoop-12.txt

Link aggregation: IEEE 802.3ad, 2005

Port based authentification with EAP: IEEE 802.1x - REV2004

Link Layer Discovery Protocol: IEEE 802.1ab, 2005

Priority based switching: IEEE 802.1p

Service Interface

9-pin D-Sub connector at front

RS232 / V24

I²C interface for external dongle

Front I/O

8 Ethernet ports via RJ45 or M12 D connectors

1 service interface via 9-pin D-Sub plug connector

16 link and activity Ethernet status LEDs (2 per channel)

Status LEDs for power, reset and error codes

CompactPCI® Bus

Compliance with CompactPCI® Specification 2.0 R3.0

Only one slot required on the 3U CompactPCI® bus

Peripheral slot

Compliance with PCI Specification 2.1

V(I/O): +3.3V

Ninth Fast Ethernet port via CompactPCI® J1

Electrical Specifications

Supply voltage/power consumption:
• +3.3V (-3%/+5%), tbd.

MTBF: Approx. 200,000h (tbc.) @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to CompactPCI® specification for 3U boards

Weight: 316 g (16HP model with M12 connectors)

Environmental Specifications

Temperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: according to EN60068-2-27

Bump: according to EN60068-2-29

Vibration (sinusoidal): according to EN60068-2-6

Conformal coating on request (standard with M12 connectors)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Firmware

Firmware for configuration and management included