M33 - 8 Analog Outputs

Technical Data

D/A Conversion

8 channels

12 bits

DAC conversion time 10µs

±5 LSB gain

Simultaneous update of all channels possible

Voltage Output

Output current: 5mA max.

Output linearity: ±1 LSB

Accuracy: ±0.2%, ±1 LSB differential

Voltage ranges: 0..10V; -5V..+5V; -10V..+10V

Voltage output stable up to 1µF capacitive load

Current Output

Accuracy: ± 0.5%

Current range: 0..20mA; 4..20mA

Max. output voltage 10V

Load resistance range: 0..500 Ohm

Slew Rates for Voltage Output

0V..+10V mode: switch from 0V to +10V; slew rate (SR) = 4V/µs

-5V..+5V mode: switch from -5V to +5V; slew rate (SR) = 4V/µs

-10V..+10V mode: switch from -10V to +10V; slew rate (SR) = 4V/µs

Peripheral Connections

Via front panel on a shielded 25-pin D-Sub receptacle connector

Via carrier board (rear I/O)

M-Module™ Characteristics

A08, D16, IDENT

Electrical Specifications

Isolation voltage: 500V DC

Supply voltage/power consumption:
• +5V (4.85V..5.25V), 480mA quiescent current, 600mA with 8 channels voltage output, 650mA with 4 channels current output
• External supply voltage +24V: 15.6V..30V

MTBF: 200,000h @ 50°C (derived from MIL-HDBK-217F)

Mechanical Specifications

Dimensions: conforming to M-Module™ Standard

Weight: 80g

Environmental Specifications

Temperature range (operation):
• 0..+60°C
• Industrial temperature range on request
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity range (operation): max. 95% non-condensing

Relative humidity range (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

MEN Driver Interface System (MDIS™ for Windows®, Linux, VxWorks®, QNX®, OS-9®)

For more information on supported operating system versions and drivers see Software.